Stain It Yourself with Colour Crete™
You can now give your concrete and other masonry surfaces a beautifully-stained, professional appearance with Colour Crete™. And you can do it yourself – it’s that easy!
Colour Crete™ gives your concrete and masonry surfaces a whole new look that’s easy to apply and hard to beat. Do it yourself and achieve long-lasting, professional results right at home.
If you’re looking to put some life back into your concrete, you’ll want to use Colour Crete™, the beautiful way to stain your concrete.
Just by following the instructions on the can, and by using the tips and information you can find on this website, you can give your surfaces a water-repellent, natural appearance which will give you years of enjoyment. For unlike other products that only coat the surface, Colour Crete™ uses a special formula that actually penetrates beneath the surface. It develops a deeply anchored bond with the concrete and masonry, the result of which will truly amaze you.
So treat yourself and your concrete to a little colour this year. Stain it yourself with Colour Crete™. Your concrete will thank you.
Sandstone
Sage
Gray
Adobe
Terra Cotta
-
Sandstone
Sandstone -
Sage
Sage -
Gray
Gray -
Adobe
Adobe -
Terra Cotta
Terra Cotta
Where to Use Colour Crete™
- Walkways
- Driveways
- Stepping Stones
- Patios
- Terraces
- Porches
- Poolside Areas
- Cultured Stone
- Even Interior Concrete and Masonry
What You’ll Need to Get Started
- Preserva Crete™ Cleaner & Etcher *Recommended*
- Colour Crete™ Concrete Stain
- Broom with synthetic bristles
- Hose with pressure nozzle
- Paintbrushes, rollers, and/or pump sprayer
- Paint pan
- Drop cloth
- Masking tape
- Colour Crete™ Satin Finish *Optional*
Satin Finish
Finish Off Your Concrete With a Velvet Touch
If you’re looking to put the finishing touch on your stained or even bare concrete or masonry surface, look to Colour Crete™ Satin Finish to complete the job. Colour Crete™ Satin Finish will create a beautiful, soft sheen on your concrete walkways, driveways, slabs, patios, and other masonry surfaces.
Colour Crete™ Satin Finish is the superior finish that’s truly easy to apply, and like all of our Preserva Products™ wood and concrete products, allows you to achieve professional results right at home. It bonds to the surface and creates a water-repellent, naturally beautiful soft sheen across the entire area. Plus it’s environmentally safe and cleans up easily with just warm water.
So finish off your concrete and masonry surfaces, beautifully, with Colour Crete™ Satin Finish.
Cleaner & Etcher
Clean, Brighten, and Etch Your ‘Crete – Safely and Effectively
Preserva Crete™ Cleaner & Etcher is the environmentally responsible, water-based product that you can use yourself to thoroughly clean concrete driveways, sidewalks, patios, garage floors, pavers, bricks, stone, and just about any textured or bare concrete or masonry surface. It is the safer alternative to products using strong acids and corrosive solutions.
Completely biodegradable with zero VOC, Preserva Crete™ Cleaner & Etcher will effectively remove dirt, grease, and soil, removing efflorescence (salt stains) and other impurities in concrete to prepare it for proper penetration and bonding of stains and paints. You can even use it to slightly roughen smooth concrete surfaces that become slippery when wet.
Efflorescence, or salt stains, can ruin the appearance of any masonry surface. Use Preserva Crete™ Cleaner & Etcher to restore the natural beauty to block, brick, or other masonry structures that have been scarred.
So next time, clean your concrete and masonry surfaces responsibly with Preserva Crete™ Cleaner & Etcher.